Ellisys SerialTek Gen5 POD EDSFF Assembly page 9

Gen5 POD EDSFF Edition Assembly Reference
Raise the Caps of the M3 Spring Loaded Screws and secure the
HCBL-EDSFF Support Tray in position on the Host/Device Cable
Adaptor Tray with the M3 Spring Loaded Screws
PIN A1/B1 Position
0004642 - R1.4
Page 9 of 9
POD Main Unit
Hook & Loop Cable Tie
PCI5-EDSFFMF
Ensure the PCI5 EDSFFMF Cable is in the correct orientation,
TOP label facing upwards. Slide the cable onto the
HCBL-EDSFF Support Tray and connect to the HOST side of
the POD Main Unit aligning PINs A1/B1.
Secure in position with the Hook & Loop Cable Tie.
M3 Spring Loaded Screw
HCBL-EDSFF Support Tray
Host/Device Cable Adaptor Tray