Ellisys SerialTek Gen5 POD EDSFF Assembly page 8

Gen5 POD EDSFF Edition Assembly Reference
Slide the Host/Device Cable Adaptor Tray into the slot on the HOST side
on the underside of the POD Main Unit at an angle of about 60 ~ .
Rotate the Cable Adaptor Tray so it is horizontal and tighten the M3
Captive Panel Screws to the POD Main Unit, ensuring not to over tighten.
M3 Captive Panel Screw
0004642 - R1.4
Page 8 of 9
Host/Device Cable Adaptor Tray
POD Main Unit