Specifications - Stihl FS 100 RX Instruction Manual

English / USA
Part 2
1. Mowing head
The cutting attachment, i. e. mowing
head, for different purposes
(special accessory).
2. Deflector
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting tool and from
contact with the cutting tool.
3. Line limiting blade
Metal blade at the deflector in order
to keep the line of the mowing head
at the proper length.
36

Specifications

EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
STIHL Single cylinder four-stroke
engine with gasoil lubrication
Displacement: 1.92 cu.in (31.4 cm
Bore: 1.57 in (40 mm)
Stroke: 0.98 in (25 mm)
Engine power to ISO 8893:
1.34 HP (1 KW) at 7,000 rpm (1/min)
Idle speed: 2,800 rpm (1/min)
Engine cutoff speed
(nominal) 10,500 rpm (1/min)
Max. output shaft speed (cutting tool
drive): 7,500 rpm (1/min)
Valve clearance
Inlet valve: 0.004 in (0.10 mm)
Exhaust valvel: 0.004 in (0.10 mm)
Fuel tank capacity
17.9 fl.oz (0.53 l)
Spark plug (suppressed)
BOSCH USR 7AC
Electrode gap 0.02 in (0.5 mm)
Rewind starter
Starter rope 0.12 in dia., 33.46 in long
(3.0 mm dia., 850 mm long)
Weight
(without cutting tool and deflector)
FS 100 R X with loop handle:
10.40 lb (4.7 kg)
3
)
FS 100 RX