Cleaning; Check Of Hydraulic Oil Level - Gearmore SPEDOVATORS Operation & Service Manual

8.2 CLEANING

To clean the machine, use detergents and not hurtful or polluting substances according to the law in
force.
Remove all foreign elements such as branches, weeds, and whatever may have become stuck into the set
of discs mechanism.
Pay greatest attention when you clean moveable, sharp, or acuminate parts, especially
if they can hurt.
Avoid cleaning directly with your hands, but use protective gloves.
Always wear protective gloves or other clothes when you use compressed air.
At the end of cleaning we suggest oiling and greasing the moveable parts.
Before performing any maintenance, make sure the inter-row has been laid fl at and rests on the
ground.
8.3 CHECK OF THE HYDRAULIC OIL LEVEL
Check the oil level by means of the special rod placed under the oil-fi lling cap.
Fig. 19
Top the oil up with the same kind of oil used to fi ll the plant.
We suggest noting the type of oil in the back of this manual.
Should the system require too frequent topping up, check for possible leaks.
DO NOT USE SOLVENTS OR IRRITATING ACIDS
36