Gearmore SPEDOVATORS Operation & Service Manual page 13

1.5 GENERAL SAFETY RULES (Continued)
⇒
Do not stay in the range of action of the machine and of the other moving parts when they are
operative. Should this not be the case, the operator shall stop the tractor.
Do not touch the moving parts and do not stay between them.
⇒
It is strictly forbidden to lift or transport people or animals with the machine.
⇒
As for road circulation, it is necessary to follow the rules of the Highway Code in force in the
area where the machine is used.
⇒
It is very important to bear in mind that the equipment carrying and/or towing can infl uence the
roadholding, steerage, and braking of a tractor. Couple the machine correctly to a tractor having
suitable power and confi guration. Read the use and maintenance manual of the tractor.
⇒
It is strictly forbidden to stay between the machine and the tractor when the engine is on.
⇒
Only personnel in good health, qualifi ed, and having a suitable driving license shall operate
the machine.
⇒
At the end of the work lay the equipment on a fl at surface sheltered from bad weather.
DO NOT OPERATE THE SET OF DISCS ROTATION CONTROL placed on the control board,
when the set of discs is not working.
DO NOT OPERATE THE SET OF DISCS ROTATION CONTROL placed on the control board,
if the set of discs has been raised from the ground.
⇒
During maintenance, disconnect the main switch from the control board and from the electric
system.
⇒
The person in charge of the safety shall approve all additional protective measures and operative
procedures.
⇒
The user shall assign the running and maintenance tasks and check that these tasks are followed.
⇒
The machine shall not be used in any way, which may compromise the safety of people, things,
assets, or the workplace.
Do not tamper with the hydraulic pipe sheathing.
⇒
It is forbidden to introduce hands or other things in the equipment area while the machine is on.
Any operation shall be performed after having disconnected the equipment from both the electric
and hydraulic source.
THE MANUFACTURER DECLINES ANY RESPONSIBILITY FOR INJURIES TO PEOPLE AND/
OR DAMAGE TO THINGS DUE TO THE NON-OBSERVANCE OF ONE OR MORE OF THE
ABOVE-MENTIONED SAFETY RULES, WHICH ARE AN INTEGRATION OF THE NORMAL
REGULATIONS IN FORCE IN THE WORKPLACE.
10