Handling & Transport Warnings - Gearmore SPEDOVATORS Operation & Service Manual

4.2 HANDLING & TRANSPORT WARNINGS
⇒
Loading and unloading shall be performed with ropes or hoisting equipment in compliance with
the law and the directions provided in the previous section.
⇒
Check that belts, ropes, and other hoisting equipment have been made in accordance with the law
in force and are provided with the relative plates attesting their law compliance.
⇒
MAKE SURE THAT THE MAXIMUM CAPACITY OF BELTS, ROPES, OR OTHER
HOISTING EQUIPMENT IS HIGHER THAN THE EQUIPMENT TOTAL WEIGHT.
⇒
Check that belts, ropes, or other hoisting equipment are in good condition.
⇒
It is strictly forbidden for things and/or people to stay in the proximity of the machine in the
loading/unloading area and transport during loading and unloading.
⇒
Do not make sharp maneuvers with the hoisting equipment while the load is raising or
descending.
⇒
Pay the maximum attention during all handling operations in order to avoid any damage
to the equipment.
⇒
Observe internal regulations and the laws concerning hoisting and transport.
⇒
IT IS FORBIDDEN TO GET NEAR OR WALK UNDER HANDING LOADS.
GEARMORE DECLINES ANY RESPONSIBILITY FOR POSSIBLE DAMAGE OR INJURY
CAUSED BY ANY ACTION OCCURRED DURING THE MACHINE LOADING OR UNLOADING.
17