GE GLDT690T Technical Service Manual page 30

https://appliancetechmanuals.com
Caution:
The clamps are easily damaged during
removal and should not be reused.
12. Remove the 2 clamps, sump outlet hose, and
interconnect hose from the sump.
Note: Factory installed hose clamps are not
reusable. When installing a water inlet valve, drain
pump assembly , wash pump assembly , or sump
assembly , replace the old clamps with new screw-
ty pe hose clamps provided. The screw-ty pe hose
clamps are available separately .
Clamp Part Number
WD01X10322
Interconnect
13. Remove the 2 Phillips-head screws that hold the
drain pump to the sump.
14. Rotate the pump 1/ 4-turn counterclockwise to
remove.
Size
15/ 16" to 1-1/ 2"
Sump
Outlet
Hose
Hose
– 30 –