PROAIM SnapRig Cage CG215 Assembly Manual

For sony a7s iii top handle

SnapRig Cage for Sony a7S III Top

Handle

(CG215)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Top Handle

Proaim SnapRig Cage CG215

1 x 1/4"- 20 Screw

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SnapRig Cage CG215 and is the answer not in the manual?

Page 1 Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Top Handle Proaim SnapRig Cage CG215 1 x 1/4"- 20 Screw All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Page 2 Camera Cage Setup • Attach the handle to the top mounting center thread hole of the SnapRig cage, then tighten it correctly using the handle knob. • Image showing top handle correctly attached to the cage. • Securely insert the camera (Not Included) the SnapRig cage.
Page 3 YOUR PROAIM SNAPRIG CAGE FOR SONY A7S III WITH TOP HANDLE ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.