PROAIM SnapRig CG210 Assembly Manual

Camera cage for canon eos r

SnapRig Camera Cage for Canon EOS R

(CG210)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Camera Cage

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SnapRig CG210 and is the answer not in the manual?

Page 1 SnapRig Camera Cage for Canon EOS R (CG210) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Camera Cage Setup • Securely insert the camera (Not Included) the cage. Align the Camera hole to the screw at the bottom of the cage and tighten the screw with provided magnetized screwdriver stores on bottom. Note: The cage is ARCA Standards so you can mount on screw mount as well as ARCA mount.
Page 3 • Match the cage thread to your tripod or ball head screw and tighten it properly. YOUR PROAIM SNAPRIG CAMERA CAGE FOR CANON EOS R ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.