Cisco 7200 Vxr Routers Interface Addresses; Cisco 7201 Router Interface Addresses; Cisco 7301 Router Interface Addresses - Cisco PA-POS-1OC3 Installation And Configuration Manual

Chapter 1 PA-POS-1OC3 Overview
Table 1-3 Interface Addresses (continued)
Platform
VIPs in the Cisco 7500
series routers (7505, 7507,
7513)
Cisco 7600 series routers
(7603, 7606, 7609, 7613)
with FlexWAN or Enhanced
FlexWAN
1. Port adapter slot 0 is reserved for the Fast Ethernet port on the I/O controller (if present).
2. Slot 1 is reserved for the supervisor engine. If a redundant supervisor engine is used, it must go in slot 2; otherwise, slot 2 can be used for other modules.

Cisco 7200 VXR Routers Interface Addresses

In Cisco 7200 VXR routers, port adapter slots are numbered from the lower left to the upper right,
beginning with port adapter slot 1 and continuing through port adapter slot 4 for the Cisco 7204VXR,
and slot 6 for the Cisco 7206VXR. Port adapters can be installed in any available port adapter slot from
1 through 6 (depending on the number of slots in the router). (Slot 0 is reserved for the I/O controller.)
See
The interface address is composed of a two-part number in the format
port-adapter-slot-number/interface-port-number. See
PA-POS-1OC3 is installed in slot 1of a Cisco 7200 series router, the interface address would be 1/0. If
the single-port PA-POS-1OC3 were installed in slot 4, the interface address would be 4/0.

Cisco 7201 Router Interface Addresses

In the Cisco 7201 router, only one slot accepts port adapters and it is numbered slot 1. See
The interface address is composed of a two-part number in the format
port-adapter-slot-number/interface-port-number. See
PA-POS-1OC3 is installed on a Cisco 7201 router, the interface address would be 1/0.

Cisco 7301 Router Interface Addresses

In the Cisco 7301 router, only one slot accepts port adapters and it is numbered slot 1. See
The interface address is composed of a two-part number in the format
port-adapter-slot-number/interface-port-number. See
PA-POS-1OC3 is installed on a Cisco 7301 router, the interface address would be 1/0.
OL-6514-04
Interface Address Format
Interface-processor-slot-number/port-adapter-
slot-number/interface-port number
Module-slot-number/port-adapter-bay-number/
interface-port-number
Figure 1-4.
Table
Table
Table
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
Identifying Interface Addresses
Numbers
Interface processor slot—0
through 12 (depends on the
number of slots in the router)
Port adapter slot—0 or 1
Interface port—0
2
Module slot—2 through 13
(depends on the number of slots
in the router)
Port adapter bay—0 or 1
Interface port—0
1-3. For example, if the single-port
1-3. For example, if a single-port
1-3. For example, if a single-port
Syntax
3/1/0
3/0/0
Figure 1-5.
Figure 1-6.
1-21