Manual Dry Cycle (Hde/Hdg5000Aw,Chde/Chdg5000Aw) - Haier HDE5000AW User Manual And Installation Instructions

MANUAL DRY CYCLE
HDE/HDG5000AW ,CHDE/CHDG5000AW
1. Press power ON button to power on. The control panel will beep once and
the dryer will change from "OFF" to the operating status. If Start/Pause button
is not pressed in five minutes after powering on, the dryer will automatically
return to OFF status.
2. Set the cycle select dial to Manual Dry Cycle.
3. Press "More or Less Time" button to set the required drying time.
4-6. Press "Temperature," "Signal," "Wrinkle Saver" to define the required programs.
NOTE: For "Manual Dry" program use of "Temperature," "Signal," "Wrinkle
Saver" buttons is the same as for auto-programs.
Dry Signal"and "Dry Level" is inactive,
7. Touch "Start/Pause" button to activate cycle.
"Anti Bacterial,"
and a beep will sound if pressed.
English
"Damp
36