Auto Dry Cycle - Haier RDE 350AW User Manual And Installation Instructions

English

AUTO DRY CYCLE

RDE/RDG 350AW
1. Turn the knob to any program except "OFF" to power on. The control panel
will beep once and the dryer will change from "OFF" to the operating status.
2. Set the cycle select dial to required auto dry cycle. The temperature level is
preprogrammed. To change this setting:
• Press the "Temp" button to set a suitable drying temperature.
• After powering on and selecting the cycle, the dryer selects the pre
programmed temperature. If a different drying temperature is required,
press the "Temp" button to select. There are four available drying
temperatures: High, Medium, Low, and Air Fluff.
• Press Start/Pause button.
• When starting the machine, close the door first, then press this button.
• If a pause is needed during drying, press this button. Pressing again will
resume operation.
21