Troubleshooting - Ego Power+ HT2410E Operator's Manual

TROUBLESHOOTING

PROBLEM CAUSE
◾
◾
◾
◾
Hedge trimmer
◾
doesn't work.
◾
◾
◾
◾
Excessive
vibration or
◾
noise.
◾
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT2410E / HT2000E
The battery pack is not attached to
the hedge trimmer.
No electrical contact between the
trimmer and battery
The battery pack is depleted.
The battery pack is too hot.
The hedge trimmer is too hot.
The front and rear switch levers are
not depressed simultaneously.
The blade is jammed.
Dry or corroded blades.
Blades or blade support is bent.
Bent or damaged teeth.
Loose blade bolts.
SOLUTION
◾
Attach the battery pack to the hedge trimmer.
◾
Remove battery, check contacts and reinstall the
battery pack.
◾
Charge the battery pack.
◾
Remove the battery pack from the tool and allow it
to cool until the temperature drops below 67°C.
◾
Release both switch levers; allow the trimmer
to cool until the temperature drops to normal
temperature.
◾
Press the lock-off button first and then press
the switch levers in the front and rear handle
simultaneously.
◾
Remove the battery pack from the tool, remove the
obstruction carefully, then reinsert the battery and
restart the tool.
◾
Lubricate the blades, following the section
"LUBRICATING THE BLADE" in this manual.
◾
Replace with a new blade or support. Contact EGO
service center for blade or support replacement
service.
◾
Replace with a new blade. Contact EGO service
center for blade replacement service.
◾
Tighten the blade bolts. Using a wrench, turn the
bolt clockwise to tighten.
11