Safety Symbols; Symbol Meaning; Safety Instructions; General Power Tool Safety Warnings - Ego Power+ HT2410E Operator's Manual

READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eye-
glasses or standard safety glasses with side shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
4
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT2410E / HT2000E
Indicates DANGER,
Safety Alert
Read
Operator's
Manual
Noise
XX
Wear Eye
Protection
Do Not
Expose To
Rain
Keep
hands and
feet away
from the
cutting
tool
WEEE
Ingress
IPX4 Protection
Degree
V Volt
Direct
Current
min -1 Per Minute
mm millimeter
cm Centimeter
No Load
n
Speed
0

GENERAL POWER TOOL SAFETY WARNINGS

WARNING:
Read all safety warnings,
instructions, illustrations and specifications provided
with this pool tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Indicates a potential personal
injury hazard.
To reduce the risk of injury,
user must read operator's
manual.
Guaranteed sound power
level.
Always wear safety goggles
or safety glasses with side
shields and a full face shield
when operating this product.
WARNING: Do not use in the
rain or leave outdoors while it
is raining.
Never attempt to operate your
power tool with one hand.
Loss of control of the power
tool resulting in serious or fatal
injury may result. To reduce
the risk of cut injuries, keep
hands and feet away from
the cutting tool. Never attach
a moving cutting tool with
your hand or any other part of
your body.
Waste electrical products
should not be disposed of
with household waste. Take
to an authorized recycler.
Protection from splashing
water
Voltage
Type or a characteristic of
current
Revolutions per minute
Length or size
Length or size
Rotational speed, at no load