Table of Contents
Advertisement
Setup Overview
To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before
using this product.
• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is required.
• Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor.
• Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents
or injuries caused by improper mounting or mishandling.
• Use the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees
upward or downward.
• This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). Provide enough space
around the monitor to prevent heat from accumulating inside. Do not cover the vent with equipment such as mounting
brackets.
NOTE:
To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's
screen area, on the table before laying the monitor face down when installing the mounting accessories.
1. Install the remote control batteries
1. Place your finger on the part marked with the p, and then pull the cover off.
2. See the instructions in the compartment and put in the supplied batteries (R03
("AAA" size) x 2) with their plus (+) and minus (-) sides oriented correctly.
3. Close the cover.
NOTE:
• When the batteries become exhausted, replace them with new (commercially available) batteries.
• The supplied batteries may become exhausted quickly depending on how they are stored.
• If you will not be using the remote control for a long time, remove the batteries.
• Use manganese or alkaline batteries only.
7
Advertisement
Table of Contents
