When A Problem Occurs With The Monitor; Nothing Is Displayed - Sharp PN-HE751 Operation Manual

Hide thumbs Also See for PN-HE751:
Table of Contents

Advertisement

When a problem occurs with the monitor

In such a case, refer to the following.

Nothing is displayed

Symptom

Nothing is displayed

on the screen.
The image on the
screen disappeared.
*
If there is no input signal, the power LED flashes red.
*
The lifespan of the backlight used in the monitor may end.
Condition
The power indicator is off
In the OSD menu, [Setup]
-> [Other Settings] -> [LED
Indicator] is set to [On]
The power indicator is lit
green
The power indicator is
flashing red
The screen, on which
the image was correctly
displayed, turned black,
started to blink, or did not
display anything.*
Cause and solution
Check that the power cord is properly connected.
Use another device to check that power is correctly supplied
to the outlet.
A terminal to which no signal is input may be selected. Press
the input switch button to select a different input terminal.
Display the OSD menu and check the following settings.
● If the OSD menu does not appear, the monitor may
malfunction.
Please contact an authorized SHARP servicing dealer or
service center for assistance.
● If the OSD menu is displayed properly, the monitor is
not malfunctioning. Adjust [Backlight / Brightness] and
[Contrast] in the [Video] settings.
● If the image is not displayed after adjusting [Backlight /
Brightness] and [Contrast] in the OSD menu, check that
the connected device operates correctly. If the monitor is
connected to a computer, check the frequency, resolution,
and type of output signal on the computer.
The power management function may be functioning. Press
any button on the keyboard, move the mouse, or press the
POWER button on the power cable or the remote control.
Check that the signal cable is correctly connected to the
input and output terminals of the monitor and the connected
device.
Check that the power adaptor is properly connected.
Check that the connected computer or video device is turned
on.
The LCD panel needs to be replaced. Please contact an
authorized SHARP servicing dealer or service center for
assistance.
55
Reference
P.8
P.18
P.35
P.70
P.23
P.20,
P.30
P.22
P.23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn-he651Pn-hc861Pn-hc751Pn-hc651

Table of Contents