Table of Contents
Advertisement
Showing the Information OSD
When the signal format changes during input switching, information such as the video input terminal, resolution information, and
IP address is displayed.
NOTE:
When the Input mode is [Media Player], the information OSD will not be displayed.
Switching Between Picture Modes
Press the MODE button of the remote control to change the Picture Mode setting between Dynamic, Standard, Conferencing,
HighBright, Custom, and HDR Video*.
* HDR Video can be selected only when an HDR signal is input.
HDMI1
3840X2160@30Hz
SDR
IP ADDRESS : 192.xxx.x.xx
33
1
1 Input mode
2
3
2 Resolution
4
3 SDR / HDR information
4 IP address*
* When [Control Interface] in the [Control
Settings] menu is set to [LAN]:
White: Connected to a LAN
Red: Not connected to a LAN
Advertisement
Table of Contents
