Picture Menu; Setup Menu; Monitor Menu - Sharp PN-B501 Operation Manuals

Controlling the Monitor with a computer (RS-232C)

PICTURE menu

Function
BRIGHT
COLOR COLOR MODE
ADJUSTMENT
WHITE BALANCE
PRESET
USER
COPY TO USER
ADVANCED RGB INPUT RANGE

SETUP menu

Function
DATE/TIME SETTING
SCHEDULE
SCHEDULE BRIGHTNESS
COMMUNICATION RS-232C/LAN
SETTING SELECT
ID SETTING ID No. SET
ID NO. SETTING
(ONCE)
ID NO. SETTING
(SUBSEQUENT)
ID CHECK
ID DISPLAY

MONITOR menu

Function
PORTRAIT/LANDSCAPE INSTALL
HORIZONTAL INSTALLATION
40
E
Command Direction
VLMP WR
BMOD WR
WHBL WR
CTMP WR
R-CONTRAST CRTR WR
G-CONTRAST CRTG WR
B-CONTRAST CRTB WR
R-OFFSET OFSR WR
G-OFFSET OFSG WR
B-OFFSET OFSB WR
CPTU WR
INPR WR
Command Direction Parameter
DATE WR YYMMDDOOMM
SC01- WR ABCDEFFGGH
SC08
SB01- WR
SB08
CTLS WR
IDST WR
IDSL W
IDLK W
IDCK W
IDDP W
Command Direction Parameter
STDR WR
MLAY WR
Parameter Reply
0-31 0-31
0 0 STD
2 2 VIVID
3 3 sRGB (sRGB cannot be used when input mode is D-SUB[COMPONENT].)
4 4 HIGH ILLUMINANCE
0-2 0-2 0:THRU, 1:PRESET, 2:USER
1-28 1-28 From 1: approximately 3,000K to 15: approximately 10,000K (500K steps)
16: approximately 5,600K, 17: approximately 9,300K, 18: approximately 3,200K
From 19: approximately 10,500K to 28: approximately 15,000K (500K steps)
"ERR" when WHBL is not set to 1.
0-256 0-256 "ERR" when WHBL is not set to 2.
0-256 0-256
0-256 0-256
-127-127 -127-127
-127-127 -127-127
-127-127 -127-127
0 0 Copies a preset value to the user setting.
0-2 0-2 0: AUTO, 1: FULL, 2: LIMITED
"ERR" when the input mode is D-SUB[RGB] or D-SUB[COMPONENT].
Reply
YYMMDDOOMM YY: Year, MM: Month, DD: Day, OO: Hour, MM: Minute
ABCDEFFGGH Schedule of a specified number
A: Schedule
B: Power
C: Day of the week 1
D: Day of the week 2
E: Day of the week 3
F: Hour
G: Minute
H: Input
0-31 0-31 Screen brightness to change
99 99 Disable brightness setting
0-1 0-1 0: RS-232C, 1: LAN
0-255 0-255 Sets the monitor's ID number. ("0" means "no ID number".)
1-255 Set a monitor's ID number to send a command.
This ID number is only effective for the command immediately after this command.
0 Clears the ID number if one has been designated.
1-255 Set a monitor's ID number to send a command.
This ID number is effective for the next and all subsequent commands after this
command.
0 Clears the ID number if one has been designated.
0 ID : xxx Displays monitor's own ID number and the selected ID number on the screen.
IDLK : yyy
0-2 0: OFF, 1: ON, 2: ON (turns OFF after 4 sec.)
(The IP address and MAC address are both displayed.)
Reply
0-1 0-1 0: LANDSCAPE, 1: PORTRAIT
0-2 0-2 0: OFF, 1: FACE UP, 2: FACE DOWN
Control/Response contents
Control/Response contents
0= Not effective, 1 = Effective
0 = OFF, 1 = ON, 2 = Android System Reboot
0 = Only once, 1 = Every week, 2 = Every day
0 = Sunday, 1 = Monday through 6 = Saturday,
9 = Not exist
0 = Sunday, 1 = Monday through 6 = Saturday,
9 = Not exist
00-23
00-59
0 = Not specified, 1 = APPLICATION, 2 = DisplayPort,
3 = HDMI1, 4 = HDMI2, 5 = D-SUB,
6 = OPTION(valid when an option is attached)
Control/Response contents
*
○
*
○
*
○