Setup - Sharp PN-85TH1 Software Manual

You can configure settings for APPLICATION mode.
Also check the "Menu Items" in the Operation Manual such as video and audio settings.
Display the applications list on the home screen of APPLICATION mode and select "Setup".
A password enter screen appears. (Factory setting)
Enter a password to release the lock. (The default setting is "admin".)
To change the password, select "Change Password".
(At least 4 characters and no more than 16 characters.)
The lock release state will continue for approx. 15 minutes.
n Setup
Date & Time
Set the date and time.
Ethernet (LAN)
Set whether or not to use LAN terminal.
Set the IP address, subnet mask, and other settings.
Wireless Region
Select the region to use this monitor.
Wireless LAN
Set whether or not to use wireless LAN.
To use wireless LAN, first set the "Wireless Region".
Configure settings for wireless LAN.
Wireless LAN Profile Backup/Recovery
Save wireless LAN settings.
By saving the settings, you can return the settings to the saved settings in the event that the wireless LAN settings are lost.
The settings are returned when you turn on the power or change "Wireless LAN" from "Off" to "On".
Bluetooth
Set whether or not to use a commercially available Bluetooth device.
Configure settings for Bluetooth.
Telnet Server
Configure settings to use a telnet server.
Telnet Server ................................... When using telnet server function, set to ON.
User Name ...................................... Set an account name when connecting to this monitor.
Password ......................................... Set a password when connecting to this monitor.
Port .................................................. Set the port number to be used.
Auto Logout Time (minutes) ............ Set the time to logout automatically by minutes.
Reset ............................................... Initialize the telnet server settings.
Proxy Settings
Proxy Settings ................................. When using this monitor in the proxy environment, set to ON.
Address ........................................... Set a proxy server's address.
Port .................................................. Set a port number when connecting to the proxy server.
User Name ...................................... Set an account name when connecting to the proxy server.
Password ......................................... Set a password when connecting to the proxy server.
Exclusion List................................... Set the address do not use proxy server.
Reset ............................................... Initialize the proxy settings.
USB Drive/SD Card
Enabled ........................................... Allow the use of USB devices and a microSD memory card.
Disabled........................................... Prohibit the use of USB devices and a microSD memory card.
Settings/Setup Lock
When using "Settings" or "Setup", set whether or not a password is necessary.
Enabled ........................................... A password is necessary.
Disabled........................................... A password is unnecessary.
Full Screen Mode
Enabled ........................................... The navigation bar and status bar do not appear.
Disabled........................................... The navigation bar and status bar appear.

Setup

15
E