Binary Inputs; System Functions; Ctrl.lln0 Local/Remote State (Also Present In Dnp Iin-Bits); Ld0.Gseggio1 Goose Supervision Status (1) - ABB Relion REC615 Manual

Section 2
DNP3 data mappings
2.3
2.3.1
2.3.1.1
Table 4:

CTRL.LLN0 Local/remote state (also present in DNP IIN-bits)

IEC 61850 name
CTRL.LLN0
.Loc.stVal
2.3.1.2
Table 5:

LD0.GSEGGIO1 Goose supervision status (1)

IEC 61850 name
LD0.GSEGGIO1
.Alm.stVal
2.3.1.3
Table 6:

LD0.LLN0 Settings supervision

IEC 61850 name
LD0.LLN0
.SetChg.stVal
.SetSeld.stVal
18

Binary inputs

Table 3: Explanations of the binary input table columns
Column name Description
IEC 61850 Original IED data object identification. Described in the IEC 61850 format as
name Logical Device.Logical Node and thereafter .Data Object.Data Attribute. Logical
Node is the same as the application function block name.
SA name The signal may have a defined label that is visible, for example, in the Application
Configuration tool in PCM600.
Description Short description of the signal. See the technical manual for more information.
Value Meaning of the input states.

System functions

CTRL.LLN0 Local/remote state (also present in DNP IIN-bits)
SA name
LD0.GSEGGIO1 Goose supervision status (1)
SA name
ALARM
LD0.LLN0 Settings supervision
SA name
-
-
Description
Remote/Local state
Description
Receiver alarm
Description
Settings changed
Settings reserved
Remote Monitoring and Control REC615
1MRS757807 B
Values
0/1=Rem/Loc
Values
1=Alarm
Values
1=Changed
1=Reserved
Point List Manual