Safety Information - Stanley ST-700-DR-E Instruction Manual

Industrial fan blower
Table of Contents

Advertisement

IMPORTANT: Read and understand all of the safety information and instructions in this
manual before operating your blower. Retain this manual for future reference.
this blower is designed to dry damp surfaces quickly. this blower produces a high-volume flat air
column that increases evaporation. For best results, be sure to install blower so all damp surfaces
are exposed to the air flow.
RISK OF EXPLOSION! Do Not operate this blower where there are harmful,
DANGER
explosive or flammable gasses, fumes or hazardous substances.
When using mains-powered appliances, basic safety precautions,including
WARNING
the following, should always be followed to reduce the risk of fire, electric
shock and personal injury.
Do Not expose to rain or water spray. Do Not submerge this blower in water
WARNING
or use in excessively wet conditions.
THIS IS NOT A TOY! Keep out of reach of children. This blower is intended for
WARNING
use by only qualified persons.
RISK OF INJURY! Keep hair, loose clothing, fingers and all body parts away
WARNING
from air inlet and outlet.
WARNING
RISK OF INJURY! DO NOT MOVE BLOWER WHILE IT IS OPERATINg.
RISK OF ELECTRIC SHOCK! TAKE PRECAUTIONS TO PREVENT INJURY.
WARNING
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,
CAUTION
this appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
This appliance can be used by children aged from 8 years and above and persons
CAUTION
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
before operating ventilator, be sure that you know
how to switch the ventilator off in an emergency.
aLwaYS use only the electrical power (voltage
and frequency) specified on the model plate of the
ventilator.
aLwaYS use an extension cord properly rated for this
appliance.
aLwaYS install the ventilator so that it is not directly
exposed to water spray, rain or dripping water.
aLwaYS ensure that all cords are protected against
short circuit and overload.
aLwaYS disconnect ventilator from power source
when not in use.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
© 2016, Pinnacle Climate Technologies, Inc.
668 Stony Hill Road #302 Yardley, PA 19067

Safety Information

STANLEY, The STANLEY Logo, The Notched Rectangle and the Yellow and Black Diagonal Package
Design are all trademarks of Stanley Black & Decker, Inc. or an affiliate thereof.
NEVEr pull or carry ventilator by power cord.
NEVEr block air inlet or air outlet while in operation.
NEVEr insert any objects through the fan guard.
NEVEr use ventilator with an external switching
device, such as a timer.
NEVEr use to ventilate harmful, explosive, flammable
or volatile gases, fumes or substances.
If ventilator is damaged, do not use it. the ventilator must
be serviced by a qualified person or service agent.
before operating ventilator be sure there are no items
that can be blown about by the stream of air. the
mandatory minimum distance from the ventilator is
one meter.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

St-701-dr-e

Table of Contents