Precautions Of Wall Mounting - Sharp PN-V601 Installation Manuallines

Precautions of mounting on the wall
Precautions of mounting on the wall
- When mounting on the wall, it is necessary to check very carefully that the wall is
strong enough to support. Please use H beams or reinforce the wall when wall is not
strong enough.
- It is assumed that it is difficult for securing clearance space of the rear so that it is
necessary to use mounting bracket suitable for maintenance from the front or make an
effort to move the display toward front easily for maintenance. Or please secure
clearance space at the rear by using decorative wall.
- It is necessary to secure enough clearance space at the rear for the cooling fans. If the
space is small, there is a possibility that heat will rise because upper displays absorb
the exhausting heat from lower displays.
Please refer to "Precautions for temperature and clearance space" (P3 – P7) to study
details.
- Please use the mounting bracket which can support 4 times weight of a display. It is
necessary that the wall on which displays are mounted must support 4 times total
weight of displays and mounting brackets (etc. concrete wall / concrete pillar).
-
Please don't cover engine grilles, intake port of cooling fans and cooling fans.
Installation mode setting on OSD (portrait or landscape)
Please set installation orientation on OSD
OSD setting procedure: [Screen setting] – [installation]
Portrait mode: [portrait]
Landscape mode: [landscape] (Default setting)
CONFIDENTIAL
LCD surface
25
PN-V601 Installation Guidelines <Rev1.4 > September.30, 2010
CONFIDENTIAL
Secure at
least
20cm
Secure Clearance
space for the rear
Wall