Removing the Till and the Drawer
7
The till in the register is detachable. After closing your business for the day, remove the till from the drawer and
keep the drawer open. To detach the drawer, pull it forward fully with the till removed. And remove it by lifting it
up. The 6-denomination coin case is detachable.
8
Opening the Drawer by Hand
Lever
9
Mounting the Spill-proof Cover
1.
On the rear side of the spill-proof cover, adhesive tapes are attached. Remove the top tapes.
2.
Lightly place the cover on the keyboard so that the hole for mode switch is placed on the mode switch on the
cabinet.
Make sure that the cover is not placed on the printer cover.
3.
When you position the cover correctly, press the adhesive tape area to fix the cover.
68
Till Coin case
The drawer automatically opens. However, when a power failure occurs or the
machine becomes out of order, slide the lever located on the bottom of the
machine in the direction of the arrow. (See the figure at the left.)
The drawer will not open if it is locked with the key.
Adhesive tape
Spill-proof
cover
Printer
cover
Hole for
mode switch