Sharp PN-V601 Installation Manuallines page 45

Periodical Maintenance
Cleaning the port of the intake fan and its surroundings.
Main dust removal area
1) There are small holes at the lower part of the cabinet.
Dust adheres to the intake holes. Please remove
dust in this part.
2) Dust adheres to the inside of the fan cover. Please detach fan
cover, and remove the dust that attaches internally.
3) Dust might adhere to the fan blades. In this case, please clean
the fan by detaching it, if necessary
Cleaning Cycle
It varies according to the environment. In a busy area,
cleaning might become necessary more often. Please decide the cleaning
cycle depending on the dust build-up.
LED
Backlight
LCD surface
CONFIDENTIAL
Air flow
Fan
Duct
Various kinds of circuit
(electronics, display circuit, etc.)
Back-side
Air flow
2 & 3.
1) Turn off the power and,
2) Detach the fan cover and remove the
dust from inside ensuring that the
screws do not fall inside.
1) Dust off from outside
44
PN-V601 Installation Guidelines <Rev1.4 > September.30, 2010
CONFIDENTIAL