Procedures Of Installation - Sharp PN-V601 Installation Manuallines

Procedures of Installation

(Please thoroughly observe these recommendations)
We recommend that the following procedures are entrusted to Sharp sales
subsidiaries or dealers/contractors trained by Sharp.
1
Check worker's
clothes and their
belongings.
Wear simple clothes and
do NOT put their mobile
phone and/or pen in a
pocket.
3
The person responsible
of installation directly
explains to the workers
how to handle the display
securely and shows them
examples.
Then, start the job.
 How to open the box for display.
 How to take the display from the box.
 How to hold the display and the holding position(s) for workers [Attachment precaution 2]
 How to temporarily store the display after taking it from the box.
We recommend temporarily storing the display on a temporary stand. If you inevitably put
the surface of LCD monitor on the ground when there is no temporary stand, check whether
there is dust and/or projection, and place on a clean board larger than the display.
 How to check and/or store the accessories of display.
CONFIDENTIAL
Prior Attention to
Explanation bezel handling
2
Make enough
space before
starting the job.
Check power cable
and/or floor levelness.
Do Not touch
LCD surface
2
PN-V601 Installation Guidelines <Rev1.4 > September.30, 2010
CONFIDENTIAL
4
Installation with stand and
wall-mounting bracket
Unlike Sharp "PN-E" standard models,
the PN-V601 requires close attention to
handling due to its thin bezel.
Even dealers or workers familiar with the
conventional models must confirm
precautions beforehand Please study
the installation guide of the PN-V601 and
recommended stands as much as
possible, and please entrust the
installation work to Sharp sales
subsidiaries or dealers /contractors
trained by Sharp.
Precautions for fan
Precautions for adjacent
positioning