Sharp PN-V601 Installation Manuallines page 28

Precautions in installing and handling 2
Precautions to prevent the strain of display
1.Please support the display symmetrically in moving (e.g. when changing installation direction from portrait to landscape)
while rotating the display to prevent the strain of the display.
symmetrically
Apply the pressure
standing vertically with handle, installation tools etc.
- For example, it is possible to cause the strain of the display when lifting up a display that was resting on a
screen by gripping a single handle or a single corner of the display.
- Please support the display symmetrically by gripping both handles or both corners of the display in order to
distribute the pressure equally on the display..
2.Please do not apply pressure on the edge and/or corners of the display.
For example, failure can be caused by standing up the
display resting on a screen by using the edge of the
display as pivot.
Please carefully stand up the display before moving the
display.
3.Please be sure not to preserve and bring up both the display itself
and packaged display at a tilt. Please be sure to preserve and
bringing it vertically. ??????
CONFIDENTIAL
to the display which is
Please grip both handles when the display is laid on the
screen.
PN-V601
×
×
27
PN-V601 Installation Guidelines <Rev1.4 > September.30, 2010
CONFIDENTIAL
Bigger board than the display
PN-V601
Handle
Protection sheet like blanket
Please do not use the edge of the
display as a pivot in moving the display
and do not apply pressure on the edge.
Please do not preserve and
bring up both the display itself
and packaged display at a
tilt.????
×