Table of Contents
Advertisement
Performing a New Installation of Cisco MNM
•
•
When you are running xdsu of the CiscoView, the following exception is generated and can be ignored:
Note
ERROR: exception occurred while examining Integration Utility configuration:
com.cisco.nm.nmim.nmic.IntgUtilCheckConfig
Setting the IP Address of the CiscoView Server
You can choose either of the following options to set the IP address of the CiscoView server.
•
•
Text similar to the following is displayed:
cmnm CiscoView Server IP Addresses changed
From: <old IP address>
To: <new IP address>
Starting Cisco MNM
Use the following steps to start Cisco MNM:
Start Cisco EMF.
Step 1
Log in with your user ID.
Step 2
Step 3
Change to the directory using the following command:
% cd <CEMF_ROOT>/bin
Note
Start the Cisco MNM using the following command:
Step 4
% ./cemf session
Step 5
Enter your login name and password.
Cisco Media Gateway Controller Node Manager Installation Guide
2-16
About
Help
You can set the IP address of the CiscoView server when prompted with the following message
during the Cisco MNM installation.
Please enter the CiscoView Server IP address [def: 0.0.0.0] [?, q]
You can change the IP address of the CiscoView server using the following command from the
Cisco EMF base directory:
# ./cmnmupdateCVip -i new CiscoView IP address
An X-server must be running, and the DISPLAY environment variable must be properly
configured. Use one of the following commands, depending on which shell you are using, to set
the X-display variable:
In "csh" or "tcsh": setenv DISPLAY <hostname>:<display number>
In "sh" or "ksh": DISPLAY=<hostname>:<display number>;export $DISPLAY
The default value for the display number is 0.
Chapter 2
Installing Cisco MNM
OL-18332-04
Advertisement
Table of Contents
