Cisco Media Gateway Controller Node Manager Installation Manual page 41

Chapter 2 Installing Cisco MNM
Table 2-5
Problem
OL-18332-04
Troubleshooting Installation Problems (continued)
Suggested Steps
7. Restart Cisco EMF.
<CEMF_ROOT>/bin/cemf start
8. Check the file <CEMF_ROOT>/log/sysmgr.log for ObjectStore failures.
If you don't see ObjectStore errors in this file, this completes the
troubleshooting procedure for this problem. If you see ObjectStore
errors similar to the following, go to Step 8.
INFO processControl.cc:1240 AV process produced bad message:
[ObjectServer], [PID : 18736] No handler for exception:
ObjectStore internal error
<maint-0025-0045> The client communication area is filled
up. (err_internal)
9. Stop Cisco EMF:
<CEMF_ROOT>/bin/cemf stop
Set the following values in the <CEMF_ROOT>/config/env/avCore.sh
10.
file.
OS_COMMSEG_SIZE=26640384; export OS_COMMSEG_SIZE
OS_COMMSEG_RESERVED_SIZE=26640384; export
OS_COMMSEG_RESERVED_SIZE
11. Restart Cisco EMF.
<CEMF_ROOT>/bin/cemf start
Cisco Media Gateway Controller Node Manager Installation Guide
Troubleshooting Common Installation Problems
2-29