Task 6: Obtain A Cisco Emf License - Cisco Media Gateway Controller Node Manager Installation Manual

Performing a New Installation of Cisco MNM
Step 4 If DNS should not be used, delete the /etc/resolve.conf file if it exists.
Step 5 Verify that the hosts entry in the /etc/nsswitch.conf file looks exactly like the following line:
hosts: files
Note If you change how DNS is configured after Cisco EMF is installed, you must uninstall and reinstall Cisco
EMF. For more information on DNS configurations, see the Cisco Element Management Framework
Installation and Administration Guide at
http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2_service_pack_7/installatio
n/guide/3_2p7adm.pdf

Task 6: Obtain a Cisco EMF License

To start Cisco EMF, you must have a valid license key file available. In a distributed configuration, the
license key is required on the management server.
To obtain a required valid license key file, do the following:
Go to the Cisco Product License Registration site at
Step 1
https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet
Fill in the Product Authorization Key (PAK). The PAK is provided on the Cisco EMF product CD sleeve.
Step 2
Click Submit.
Step 3
Verify that the product information shown on the screen is correct, and if it is correct, click Continue.
Step 4
Step 5 Select the version of the Cisco EMF product you are licensing in the Version number field.
Step 6 Enter the hostname of the server where the Cisco EMF product is installed. You can obtain the server's
hostname by entering the hostname command at the server's command line prompt.
Note
Enter the host ID of the server where the Cisco EMF product is installed. (The host ID is a hexadecimal
Step 7
string that identifies the system; it is not the IP address.) You can obtain the server's host ID by entering
the hostid command at the server's command line prompt.
Step 8 Read the End-User License Agreement and click I Accept. You must accept to get a license.
Step 9 Verify the registrant information shown on the screen.
Click Continue.
Step 10
Verify the summarized information and click Submit.
Step 11
The license request is submitted. The Cisco EMF permanent license key file is returned to you as an
e-mail attachment.
Cisco Media Gateway Controller Node Manager Installation Guide
2-6
The server hostname must not include a period (.).
Chapter 2 Installing Cisco MNM
OL-18332-04