Cisco Media Gateway Controller Node Manager Installation Manual page 27

Chapter 2 Installing Cisco MNM
Patch: 190702-01
The information displayed when you run this script varies with the Cisco MNM release and the patch
Note
you are using.
Table 2-4
Name
mgcEM
hostEM
If you suspect problems with the installation, check the installation log file (which by default is
Note
/var/tmp/installCSCOcmnm.log) to search for errors.
Verifying the Installation of CiscoView 6.1.8
Before starting Cisco MNM, verify that the CiscoView 6.1.8 package is installed by entering the
following command:
# ./cmnmupdateCVip -s
•
•
CiscoView is designed to work with CiscoWorks 2000 (an integrated suite of network management
tools). When you install CiscoView packages from the Cisco MNM media kit, the following functions
of CiscoView are not supported:
•
•
•
OL-18332-04
------------------------------------
CSCOcmnm Element Manager Versions
Patch Build
Name Version Level
------------------------------------
hostEMm 2.8.1 00
mgcEMm 2.8.1 00
------------------------------------
Table 2-4 gives descriptions on the two types of element managers, mgcEM and hostEM.
Element Managers
Description
Common Element Manager for Cisco PGW 2200 Softswitch node devices
Element Manager for Cisco PGW 2200 Softswitch host signaling, trunking, and dial
plan components
If the package is installed, text similar to the following is displayed:
Current Ciscoview IP Address: 10.10.10.10
where 10.10.10.10 is the server IP address.
If the package is not installed, text similar to the following is displayed:
./modules/installUtilities: not found
Telnet
CCO connection
Preferences
Build
Num Type
102308 REL
102308 REL
Cisco Media Gateway Controller Node Manager Installation Guide
Performing a New Installation of Cisco MNM
2-15