C H E C K I N G A N D A D J U S T M E N T ' S P R I O R T O M E A S U R E M E N - Kenwood CS-4125 Instruciton Manual

7. I n order to prevent the C R T ' s fluorescent screen from scorching, do
adjust the brightness higher than necessary and do not leave the spotting
function on for long periods of t i m e .
8. T h e set has been equipped w i t h handle, so that you c a n position i t i n either
horizontal or diagonal positions. H o w e v e r , do not place a n y objects on top of
the set or position i t i n areas where the ventilation holes i n the c a s i n g are
blocked i n a n y w a y . S u c h blockage w i l l cause the temperature of the i n t e r n a l
components to increase, r e s u l t i n g i n possible damage to the u n i t . Do not put
liquid, metal or other foreign matters through the v e n t hole, etc.
9. Do not use X 1QMAG during X - Y operation.
occur w h e n X 1 0 M A G is used.
10. T h e probe h a s been manufactured w i t h the same level of delicate precision as
the oscilloscope itself. B e v e r y careful w h e n h a n d l i n g i t .
6
W a v e pattern noise tends to
not