H3C S7500E-XS Series Command Reference Manual page 25

TCP DSCP value: 10
Flow table:
Table ID(type): 0(MAC-IP)
Table ID(type): 1(Extensibility)
Flow-entry max-limit: 65535
Datapath ID: 0x0000001234567890
Default table-miss: Permit
Forbidden port: VLAN interface
Qinq Network: Disabled
Tcp Nsr: Enabled
Active configuration:
None
Table 7 Command output
Field
Configuration information
Description
Active status
Inactive configuration
Active configuration
Classification VLAN, total
VLANs
loose mode
In-band management VLAN,
total VLANs
Connect mode
MAC address learning
TCP DSCP value
Flow table
Table ID(type)
count
Flow-entry max-limit
Datapath ID
Default table-miss
Forbidden port
Description
Information about the configuration.
Description of the OpenFlow instance.
OpenFlow instance status: Active or Inactive.
Inactive configuration for the OpenFlow instance.
Active configuration for the OpenFlow instance.
VLANs that are associated with the OpenFlow instance and the total
number of these VLANs.
The loose mode is used.
Inband management VLANs and the total number of them.
Connection mode of the controller:
•
Single—The OpenFlow instance connects to only one controller at a
time.
•
Multiple—The OpenFlow instance can simultaneously connect to
multiple controllers.
Whether MAC address learning is disabled: Enabled or Disabled.
DSCP value for OpenFlow packets.
Flow table information for the OpenFlow instance.
Type of the flow table: MAC-IP or Extensibility.
Total number of flow entries included in the current flow table.
Maximum number of flow entries that the current flow table can include.
Datapath ID of the OpenFlow instance.
Default action of the table-miss flow entry: Permit or Drop.
Type of interfaces that are forbidden to be reported to the controller:
•
VLAN interface.
•
Virtual Switch Interface. The switch does not support the Virtual
Switch Interface type in the current software version.
•
L3 Physical Interface—Layer 3 Ethernet interfaces.
18