H3C S7500E-XS Series Command Reference Manual page 20

Field
ICMPv6 code
IPv6 ND target address
IPv6 ND source MAC
address
IPv6 ND target MAC
address
MPLS label
MPLS tc
Tunnel ID
IPv6 extension header
Output interface
VRF index
Fragment
Physical output interface
CVLAN ID
Experiment
Table 4 Actions
Field
Drop
Output interface
send length
Group
Set queue
Set field
Set MPLS TTL
Set IP TTL
Push VLAN tag
Push MPLS tag
Pop MPLS tag
Push PBB tag
Pop VLAN tag
Pop PBB tag
Mask field
N/A
N/A
N/A
N/A
N/A
N/A
Mask
Mask
N/A
N/A
N/A
N/A
Mask
N/A
Description
Drops the matched packet. This action is not defined in the OpenFlow
specifications.
Sends the packet through a specific port. For more information about ports,
see Table 5.
Specifies the max length of bytes to be taken from the packet and sent to the
controller.
This field appears only when the reserved port of the controller type is specified
as the output port.
Specifies a group table to process the packet.
Maps the flow entry to a queue specified by its ID.
Modifies a field of the packet.
Sets the MPLS TTL.
Sets the IP TTL.
Adds a VLAN tag to the packet.
Adds an MPLS tag to the packet.
Removes the outermost MPLS tag from the packet.
Adds a PBB service tag to the packet.
Removes the outermost VLAN tag from the packet.
Removes the outermost PBB service tag from the packet.
13
Description
ICMPv6 code.
Target IP address in an IPv6 Neighbor
Discovery message.
Source link-layer address in an IPv6 Neighbor
Discovery message.
Target link-layer address in an IPv6 Neighbor
Discovery message.
Label in the first MPLS header.
Traffic Class (TC) in the first MPLS header.
Metadata and mask that are associated with a
logical port.
IPv6 extension header and mask.
Output port.
VPN index.
Fragment.
Output physical port.
CVLAN ID and mask.
Extension matching fields. Address ID
represents the unique identifier of an address.