Table of Contents
Advertisement
COMMUNICATION ALARM
6.2.6
Remove the RS-485 plug (RMM2) from the NGC-30-CRMS board.
Go to Main screen
Notice, ID for Circuit 2 is in Red after a 15-second timeout.
Circuit 2 was using an RTD input from the unplug RMM2 .
(Your demo may be using a different Circuit #.)
Press Acknowledge button
Automatically brings you to the Events|Alarm screen detailing the RMM2 communication
alarm and RMM2 device number.
Reinstall the RS-485 plug back into the NGC-30-CRMS board and communication alarm
will clear.
nVent.com | 35
Advertisement
Table of Contents
