Circuit 5 Voltage Monitoring - Status Only; Creating Alarms; Ground-Fault Trip Alarm - nVent RAYCHEM NGC-30 User Manual

6.2 Creating Alarms

CIRCUIT 5 VOLTAGE MONITORING – STATUS ONLY
6.1.2
Monitor's line voltage from the NGC-30-CRM/-CRMS (5GF-C).
Go to the status screen for Circuit 5 by either
1. Press on Circuit's 5 ID name (Voltage) or
2. Press on Status|Circuit, press on Circuit field and select 5 and Enter.

GROUND-FAULT TRIP ALARM

6.2.1
Using Circuit 1
Press the ground-fault button on the front panel.
IMPORTANT: Circuit 1 must be on.
nVent.com | 25