GROUND-FAULT ALARM
6.2.5
Turn Circuit 3 Ground-Fault dial, on the front panel of the demo unit, clockwise until G.F.
on Main screen reads between 21 and 29.
Notice ID and G.F. in Red.
Press Acknowledge button
Automatically brings you to the Events|Alarm screen detailing the recent alarm.
Ground-Fault Alarm is a latching alarm, (notice it is blinking red/orange).
Return to the Main screen and turn Circuit 3 Ground-Fault dial clockwise until G.F. is
greater than 30 mA.
Notice, Heater turned off, Relay status Trip
nVent.com | 33