Low And High Current Alarms - nVent RAYCHEM NGC-30 User Manual

LOW AND HIGH CURRENT ALARMS

6.2.3
Low Current Alarm
Go to Setup|Current screen for Circuit 3 and change the Low/High Current Alarm to 3 and
10.0 A.
Turn Circuit 3 Line Current Dial, on the front panel of the demo unit, counter clockwise
until it stops.
Press Main to go to the Main screen
Notice ID and Amps are in Red for Circuit 3.
IMPORTANT: Alarm will not show up until after 1 minute.
nVent.com | 30