Kärcher SB V1 Eco Manual page 28

Install hose recovery (optional)
 Install the hose recovery according to
the enclosed assembling instructions.
Setting the recovery force of the cable
 Remove the screw on the upper side of
the covering hood of the cable.
 Remove covering hood.
 Set the recovery force.
– Increase the force: Turn the hand-
wheel in clockwise direction (+).
– Reducing the force: Turn the hand-
wheel in an anticlockwise direction (-).
 Replace the covering hood and tighten
the screws.
 Establish the electrical connection.
 Check functioning of the appliance.
 Set the vacuum cleaning time accord-
ing to customer requirements.
 Connect the cable that you have al-
ready guided through the base plate
opening to the main appliance switch
according to the enclosed circuit plan.
28
Start up
– 13
EN