Table of Contents
Advertisement
Section V - MAINTENANCE (cont'd)
5.4 SUMMARY OF REQUIRED LUBRICANTS
(a) Hydraulic Oil
Examples:
1. Texaco Rando HD 46
2. Shell Tellus Oil 46
3. Mobil Nuto H46
or EQUAL
(b) Winch Worm Gear Oil - SAE 140 general purpose gear oil.
Examples:
1. Humble - Pen-O-Led EP #5
2. Phillips - Phillips Worm Gear Oil 140
3. Shell - Macona #978
4. Sinclair - Pennant EP #6
5. Standard - Stanogear #5
6. Texaco - Maropa #5
(c) Grease - Synthetic Fortified such as Drydene SFG.
(d) Oil for miscellaneous bearing surfaces - SAE 30.
(e) Cable Oil - SAE 30 or special cable lubricant.
THERE IS NO PRACTICAL WAY TO DETERMINE
THE LIFE EXPECTANCY OF HYDRAULIC HOSES
WHILE APPEARING TO BE IN EXCELLENT CONDITION, THESE
COMPONENTS MAY BE ADVERSELY AFFECTED BY
USAGE, WEATHER OR THE PASSING OF TIME.
THEREFORE, IT IS RECOMMENDED THAT ALL
RUBBER COMPONENTS, ESPECIALLY HOSES, BE REPLACED
EVERY FIVE (5) YEARS REGARDLESS OF APPEARANCE.
5.5 CARE OF HYDRAULICS IN COLD CLIMATES
Regions subject to continuous sub-zero or arctic climates require
special hydraulic fluids. Contact CENTURY or your local supplier for
information regarding specific temperature requirements.
AND OTHER RUBBER COMPONENTS.
NOTE
V-3
Advertisement
Table of Contents
