Table of Contents
Advertisement
Section III - OPERATIONAL FUNCTIONS
3.1 Your new wrecker is fully hydraulic. It receives its power by means of
a Power Take-Off/Pump combination mounted to the vehicle
transmission . Since the pump is attached to the PTO, no drive line
or universal joint is required. See Figure 3.1.
3.2 Each function of the Wrecker can be controlled from either of the
dual Control Stations located at the rear of the wrecker body. See
Figure 3.2.
WRECKER
FIGURE 3.1
FIGURE 3.2
III-1
Advertisement
Table of Contents
