Section IVB - OPERATING INSTRUCTIONS
4B.1
INSTRUCTIONS FOR INSTALLATION
1. Unlock anti-theft steering lock if vehicle is equipped with one.
CARS WITH ANTI-THEFT STEERING LOCKS
SHOULD NEVER BE TOWED ON THEIR FRONT WHEELS
WHILE LOCKED IN THE TURNED POSITION
2. Turn steering wheel so that front wheels are directed straight
ahead.
3. Insert latch of steering wheel lock into its buckle. Make sure
it locks in place. See Figure 4B.1.
4. Place steering wheel grip on bottom of steering wheel and
secure it by tightening jam nut against sliding clamp.
5. Hook seat grip under the front edge of auto seat or to a rigid
seat frame member that is securely fastened in place. Make
sure you do not hook it to a removable seat cushion.
6. Grasp the free end of the belt and pull until belt is tight.
7. Recheck jam nut to make sure it is still tight.
STEERING WHEEL LOCK
FIGURE 4B.1
IVB-1