Table of Contents
Advertisement
Section IV - OPERATING INSTRUCTIONS
4.1 For reasons of safety, it is important that the Owner(s) and
Operator(s) should become thoroughly familiar with the controls and
functions of the wrecker before attempting any operation.
4.2 HYDRAULIC WINCHES
The hydraulic winches are to be used in retrieving and lifting a
vehicle for transport.
(a) DO NOT fasten the winch hook directly to any vehicle to be
towed.
(b) DO NOT wrap the winch cable around any object.
(c) DO NOT exceed the working limit of the cable.
(d) DO NOT use the winches or cable for the lifting of people.
4.3 PREPARING TO LOAD VEHICLE
(a) Line wrecker up with the center of disabled vehicle to be towed.
(b) Reduce truck's engine to idle and apply parking brake. Depress
clutch, place transmission in neutral and engage PTO by pulling
knob located on panel in cab. See Figure 4.1.
WRECKER
FIGURE 4.1
IV-1
Advertisement
Table of Contents
