Dixie Narco P Series Technical Manual
  1. Manuals
  2. Brands
  3. Dixie Narco Manuals
  4. Vending machines
  5. P Series
  6. Technical manual

Dixie Narco P Series Technical Manual

Pepsi-cola high visibility vender
Hide thumbs Also See for P Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Pepsi-Cola High Visibility Vender
Manufactured by
P-SERIES HVV
Models DN552P & DN756P
Beginning Production Run 6925CB
Dixie-Narco, Inc.
P.O. Drawer 719
Williston, SC 29853-0719
803-266-5001
fax: 803-266-5049
Visit us on the web: www.dixienarco.com
803,903,770.31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dixie Narco P Series

Summary of Contents for Dixie Narco P Series

  • Page 1 Pepsi-Cola High Visibility Vender P-SERIES HVV Models DN552P & DN756P Beginning Production Run 6925CB Dixie-Narco, Inc. P.O. Drawer 719 Manufactured by Williston, SC 29853-0719 803-266-5001 fax: 803-266-5049 Visit us on the web: www.dixienarco.com 803,903,770.31...

  • Page 2: Table Of Contents

    Table of Contents GENERAL INFORMATION Application................................. 4 Vender Safety Precautions..........................4 Product Identification............................4 Physical Characteristics ..........................4 Receiving Inspection............................4 INSTALLATION & SETUP Unpacking the Vender............................. 5 Electric Power Requirements......................... 5 Ground the Vender............................5 Pepsi Electronic Door Lock........................5 - 6 Placing the Vender on Location........................
  • Page 3 GENERAL INFORMATION P-SERIES INSTALLATION & SETUP GUIDE Table of Contents WIRING DIAGRAMS AND SCHEMATICS Figure 1 – SBC Wiring Diagrams ......................43-44 Figure 2 – Compressor Wiring Diagram .....................45 PARTS LIST MAIN DOOR EXTERIOR ........................46-47 MAIN DOOR INTERIOR (A) ........................48-49 MAIN DOOR INTERIOR (B) .........................50 SELECT PANEL.............................51 T8 LIGHTING ..............................52 ELECTRONIC COMPONENTS ......................53-54...

  • Page 4: General Information

    2003 which have D = 2005 significant differences in programming and parts content from previous venders. To order parts or information pertaining to this vender, please contact PHYSICAL CHARACTERISTICS Dixie Narco. 552P 756P VENDER SAFETY PRECAUTIONS HEIGHT 72”...

  • Page 5: Unpacking The Vender

    INSTALLATION & SETUP P-SERIES If the outlet will not accept the power cord plug, contact an electrician to install a proper AC outlet. The Dixie-Narco P -Series vender is designed utilizing the latest technology. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY UNPACKING THE VENDERS SUBJECT THE USER TO THE RISK Remove the stretch wrap and top cover from the...

  • Page 6: Placing The Vender On Location

    INSTALLATION & SETUP P-SERIES weight of a fully loaded vender (approximately 1134 TO OPEN THE ELECTRONIC DOOR LOCK: lbs.) The vender must be positioned close enough to an electrical o utlet that an extension cord is not (OPTION) required. If the machine will be subject to user 1.

  • Page 7: Coin Changers And Other Accessories

    ACCESSORIES an alternative package in the P -Series vender, The vender must have an MDB coin changer contact Dixie Narco Technical Service Dept. or your installed and can have an MDB bill acceptor Representative For Assistance. installed. If the MDB coin changer and other MDB...

  • Page 8: Bprogramming Normal/Service Mode

    INSTALLATION & SETUP P-SERIES PROGRAMMING METHOD AUGUST 2003 P-SERIES The controller has two modes of operation: NORMAL and SERVICE. NORMAL MODE: In Normal Mode, on power up display will show the software version installed in vender for 10 Seconds, then change to Ice Cold Drink message, Product Price, Sold Out, Credit Value, or decimal point.

  • Page 9: Historical Data

    PROGRAMMING P-SERIES FRONT PANEL PROGRAMMING SERVICE MENU Historical Data This function shows the user the vender accounting over the life of the vender. Use the following select buttons to view the total sales in dollars, total number of vends and the total number of vends for each selection. Press Select Button 1: Shows the historical total cash sales for the life of the vender.
  • Page 10 PROGRAMMING P-SERIES Dump Coin Mech: This function is used to dump coins from the coin mechanism. Press select button #1 to enter mode and the lowest coin value dispensable will show on the display. Press and hold select buttons 1 & 2 simultaneously to scroll through the different coin values available to dump coins.

  • Page 11: User Menu

    PROGRAMMING P-SERIES User Menu: This function is used to configure the vender to operate in a fashion best suited for the vender location. To move to “Diagnostics”, press & hold select buttons 1 & 2 simultaneously, to enter the User Menu sub-menus press select button1.
  • Page 12 PROGRAMMING P-SERIES “Vend Angle” - Will only be displayed if the package type selected is custom. This allows setting the vend angles for the column selected in the column prompt. “Vend Angle # ### will be displayed where the first # is the product number in the column and ### is the vend angle for that product.
  • Page 13 PROGRAMMING P-SERIES Daylight Savings Time Press select button 1 and the current setting will show on the display. Press and hold select button 1 to scroll through the “Daylight Savings Time” options listed: “American” – North American rules – Set forward 1 hour at 2:00 am on the first Sunday in April;...
  • Page 14 PROGRAMMING P-SERIES Note: The four-button code must use select buttons 1 through 9 only. Enter the four button code while in sales mode to view the data. Once entered the listed data is available from the front of the vender: Press select button 1: Show historical cash sales.
  • Page 15 PROGRAMMING P-SERIES Stop 1 This function is used to set the hours and minutes to stop period 1 limited access. Press select button 1 and current four-digit hour and minute will be displayed. (24 hour). Press & hold select button 1: Set Hours Press &...
  • Page 16 PROGRAMMING P-SERIES Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu. Start This function is used to set the hours and minutes to start secondary pricing. Press select button 1 and the current four-digit hour and minute setting will be displayed. Press and hold select button 1 to change the hour setting, press button 2 to change the minute setting.
  • Page 17 PROGRAMMING P-SERIES Stop This function is used to set the hours and minutes to stop lighting routine. Press select button 1 and the current four-digit hour and minute setting will be displayed. (24 hour) Press & hold select button 1: Set Hours Press &...
  • Page 18 PROGRAMMING P-SERIES Days This function is used to set the days of the week to use Temperature Setting Routine. Day of Week: Sunday Wednesday Saturday Return Monday Thursday All Days Tuesday Friday No Days Press select button 1 and “Monday #” will show on the display, where # is “0” (disable) or“1” (enable).
  • Page 19 PROGRAMMING P-SERIES Free Vend This function is used to set the Free Vend option. Note: For free vend to become active a free vend switch must be connected to controller on free vend switch connector. Press select button 1 and “ENABLE”...

  • Page 20: Diagnostics Menu

    PROGRAMMING P-SERIES Return Press select button 1 to return to “User Menu”. Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu. Diagnostics This function allows you to systematically diagnose problems related to the vender. To move to “Auto Test” press select buttons 1 &...
  • Page 21 PROGRAMMING P-SERIES Relay – Relays can only be tested if the environmental controls package is installed in the vender. Compressor # This function allows you to test the relay electronic control of the compressor. CAUTION: Disconnect power to the compressor before testing the compressor relay. Failure to disconnect power to the compressor before testing the relay could result in damage to the compressor.

  • Page 22: Quick Reference Prompts

    PROGRAMMING P-SERIES P-SERIES SBC QUICK REFERENCE MENU PROMPTS Main Main Menu Sub-Menu Sub-Sub-Menu Menu Sub-Menu Sub-Sub-Menu Historical Data User con't. Light Days Resettable Data Start Set Price Stop Cash Settings Fill Coin Mech Enable Dump Coin Mech Return Coin Rules Refrigeration Temperature Escrow...

  • Page 23: Default Space-To-Sales Setting

    INSTALLATION & SETUP P-SERIES Factory Default Setting Selection # Column # Selection # Column # Page 23 of 76...

  • Page 24: Set Vender Type

    INSTALLATION & SETUP P-SERIES 10 column machines Setting The Vender Type DN760-9, DN760-10, To program with “SCOL” on the display press DN760-11, select button 1. The display will show “6” for DN760-12, six columns. Press select buttons 1 & 2 to scroll DN760-13, through available number of columns in the DN760HV -12,...

  • Page 25: Cgeneral Maintenance

    GENERAL MAINTENANCE P-SERIES The most important facets of proper vender care and THE COMPRESSOR ELECTRICAL maintenance are the electrical power supplied to it, CIRCUIT IS ALWAYS LIVE WHEN leveling, and cleanliness of the machine and its THE PLUG IS CONNECTED TO AN components.

  • Page 26: Eprom Replacement

    GENERAL MAINTENANCE P-SERIES EPROM REPLACEMENT Software changes / upgrades are accomplished by changing the EPROM on the Control Board. HVV P-Series Single Board Controller Software Update Procedure This document describes how to update software on the Single Board Controller (SBC). Note: All existing software revisions, except software version 804,920,870.01, will automatically update the software revision 804,920,870.01 or higher upon installation.
  • Page 27 GENERAL MAINTENANCE P-SERIES III. Manual Reprogramming (all 804,920,870.01 or if an EPROM does not automatically reprogram the SBC) At power up, the current software version will be displayed. To manually program the control board with • the new software, press the blue service switch on the SBC to enter the service menu. Advance to the “Auto Test”...

  • Page 28: Major Component Description Electrical

    MAJOR COMPONENT DESCRIPTION P-SERIES ELECTRICAL REFRIGERATION Transformer Provides 24 volt and 12 volt 115 VAC power to the Machine Controller Compressor Embraco, 1/3 HP, 115 VAC, 60 Hz Fuse (F1) 1.6 Amp Slo Blo 1 Phase Control Board Power Unit uses 9.0 oz. of 134A (includes display and MDB Refrigerant Peripherals)

  • Page 29: Sbc Control Board

    MAJOR COMPONENT DESCRIPTION P-SERIES SBC CONTROL BOARD Motor Secondary DEX Display Select Switches Temp Sensor Energy Management Sold Out LED’s Ready to Vend AC Power Cam / Sold Out Battery Service Switch Page 29 of 76...

  • Page 30: All Coins Are Rejected

    TROUBLESHOOTING FLOWCHARTS These charts are intended to isolate and correct most problems you might encounter. ALL COINS ARE REJECTED Page 30 of 76...

  • Page 31: All Bills Are Rejected

    TROUBLESHOOTING P-SERIES ALL BILLS ARE REJECTED Page 31 of...

  • Page 32: Incorrect Change Dispensed

    TROUBLESHOOTING P-SERIES INCORRECT CHANGE DISPENSED Page 32 of...

  • Page 33: Selection Will Not Vend

    TROUBLESHOOTING P-SERIES SELECTION WILL NOT VEND Page 33 of...

  • Page 34: Ice / Frost On Evaporator

    TROUBLESHOOTING P-SERIES ICE / FROST ON EVAPORATOR COMPRESSOR RUNS CONTINUOUSLY Page 34 of...

  • Page 35: Compressor Will Not Start

    TROUBLESHOOTING P-SERIES COMPRESSOR WILL NOT START Page 35 of...

  • Page 36: Machine Not Cooling

    TROUBLESHOOTING P-SERIES MACHINE NOT COOLING Page 36 of...

  • Page 37: Can't Enter The Menu Or Diagnostics

    TROUBLESHOOTING P-SERIES CAN’T ENTER THE MENU OR DIAGNOSTICS Note: Prior to checking wires or connections, ensure power has been removed from vender. Page 37 of...

  • Page 38: Lights Are Not On

    TROUBLESHOOTING P-SERIES LIGHTS ARE NOT ON Page 38 of...

  • Page 39: One Or More Motors Run When Main Door Is Closed

    TROUBLESHOOTING P-SERIES ONE OR MORE MOTORS RUN WHEN MAIN DOOR IS CLOSED (Display Scrolls “PRIMING”) Page 39 of...

  • Page 40: Sold Out

    TROUBLESHOOTING P-SERIES SOLD OUT Page 40 of...

  • Page 41: The Display Is Dead

    TROUBLESHOOTING P-SERIES THE DISPLAY IS DEAD Page 41 of...

  • Page 42: Can't Read The Display

    TROUBLESHOOTING P-SERIES CAN’T READ THE DISPLAY Page 42 of...
  • Page 43 PARTS LIST P-SERIES 6 Select / 6 Column Page 43 of...
  • Page 44 PARTS LIST P-SERIES HVV 12 Select / 8 Column Page 44 of...
  • Page 45 PARTS LIST P-SERIES Refrigeration Circuit Diagrams Page 45 of...

  • Page 46: Main Door Exterior

    PARTS LIST P-SERIES MAIN DOOR EXTERIOR Page 46 of...
  • Page 47 PARTS LIST P-SERIES MAIN DOOR EXTERIOR DN552P DN756P ITEM PART DESCRIPTION Main Door Assembly HVV 6 631,153,30x.x3 631,153,40x.x3 Door Weld Assembly (Blue) 631,054,10x.x3 631,050,10x.x3 Port Trim (Trim, Spacer Bezel) 801,815,22x.x1 801,815,22x.x1 Port Support (Right) 631,051,23x.x3 Same Port Support (Left) 631,153,20x.x3 Same Door, Stop 631,001,43x.x3...

  • Page 48: Main Door Interior (A)

    PARTS LIST P-SERIES MAIN DOOR INTERIOR (A) Page 48 of...
  • Page 49 PARTS LIST P-SERIES MAIN DOOR INTERIOR (A) DN552P DN756P ITEM PART DESCRIPTION Closure Strip 609,050,14x.x3 Same Port Support (Right) 631,051,23x.x3 Same Port Support (Left) 631,153,20x.x3 Same Door, Stop (Blue) 631,001,43x.x3 631,051,24x.x3 Nut, Hex 8 – 32 900,800,81x.x1 Same Clamp, Cable 1” Heyco 3390 901,901,89x.x1 Same Tie, Wire 7 ½...

  • Page 50: Main Door Interior (B)

    PARTS LIST P-SERIES MAIN DOOR INTERIOR (B) DN552P DN756P ITEM DESCRIPTION Assembly Coin Return 631,052,00x.x3 Same Coin Return Rocker 631,050,17x.x3 Same Coin Return Mounting Bracket 631,050,18x.x3 Same Roller Pin 5/32 x 2 3/8 900,502,19x.x1 Same Roller Pin Retainer 900,900,90x.x1 Same Coin Return Spring 901,700,63x.x1 Same...

  • Page 51: Select Panel

    PARTS LIST P-SERIES SELECT PANEL DN552P DN756P ITEM PART DESCRIPTION 631,056,80x.x3 631,051,60x.x3 Select Panel Assembly, Right Pepsi HVV (Blue) 631,056,50x.x3 631,051,70x.x3 Select Panel Assembly, Left Pepsi HVV (Blue) 631,050,64x.x3 631,050,16x.x3 Bracket, Switch/ Button HVV 631,056,90x.x3 631,051,80x.x3 Stud Select Panel Assembly, Right Pepsi (Blue) 631,056,70x.x3 631,051,90x.x3 Stud Select Panel Assembly, Left Pepsi (Blue)

  • Page 52: T8 Lighting

    PARTS LIST P-SERIES T8 LIGHTING DN552P DN756P ITEM PART DESCRIPTION Assembly, Ballast T8 PI 631,006,90x.x3 640,050,20x.x3 Bracket, Lamp Socket Top/Bottom 562,050,04x.x3 Same Harness, T8 Lighting 4 Lamp (Not shown) 804,918,34x.x1 Same Boot, Lamp 802,001,44x.x1 Same Fluorescent Bulb ( F32T8 / TL865) 4’ 804,700,76x.x1 Same Fluorescent Bulb ( F17T8 / TL865) 2’...

  • Page 53: Electronic Components

    PARTS LIST P-SERIES ELECTRONIC COMPONENTS Page 53 of...
  • Page 54 PARTS LIST P-SERIES ELECTRONICS COMPONENTS DN552P DN756P ITEM PART DESCRIPTION 805,202,44x.x1 Same Electronic Lock Assembly 801,815,42x.x1 801,814,19x.x1 Electronic Lock Light Pipe 801,306,16x.x1 Same Controller Cover 804,918,69x.x1 Same Display Board Samsung 804,922,14x.x1 804,922,14x.x1 Transformer, P-Series 640,010,10x.x3 Same Control Board Assembly SBC 804,800,71x.x1 Same Fuse 1.6 Amp (F1) (Fast Acting)

  • Page 55: Inner Door

    PARTS LIST P-SERIES INNER DOOR Page 55 of...
  • Page 56 PARTS LIST P-SERIES INNER DOOR DN552P DN756P ITEM PART DESCRIPTION 640,050,60x.x3 639,050,20x.x3 Inner Door Assembly 801,819,05x.x1 801,819,04x.x1 Inner Door Gasket 640,050,70x.x3 639,050,30x.x3 Sub assembly Inner Door 803,871,36x.x1 803,871,78x.x1 Label, STS/Package Set Up 801,819,15x.x1 Same Gate, Front Product Positioner 801,809,15x.x1 Same Retainer Frame 801,809,16x.x1 Same...

  • Page 57: Cabinet And Vend Mechanism (Section1)

    PARTS LIST P-SERIES CABINET AND VEND MECHANISM (SECTION 1) DN552P DN756P ITEM PART DESCRIPTION 631,051,07x.x3 169,000,13x.x3 Cover Hinge Pocket 631,051,14x.x3 Same Hinge, Top (Main Door) – Blue 631,152,90x.x4 Same Kit, Door Hinge – Blue 169,000,15x.x3 Same Hinge, Spacer 805,300,42x.x1 Same Bearing, Hinge –...
  • Page 58 PARTS LIST P-SERIES CABINET AND VEND MECHANISM (SECTION 2) DN552P DN756P ITEM DESCRIPTION Assembly Rear Spacer Narrow 639,075,00x.x3 Same Vend Motor - Narrow Column 804,501,23x.x1 Same Vend Motor - Wide Column 639,071,80x.x3 Same Vend Motor Cover 640,070,45x.x3 639,070,55x.x3 Rear Spacer Wide 639,071,70x.x3 Same Stack Assembly...

  • Page 59: Cabinet And Vend Mechanism (Section 2)

    PARTS LIST P-SERIES CABINET AND VEND MECHANISM (SECTION 2) DN552P DN756P ITEM DESCRIPTION Load Bar, Steel 801,306,59x.x1 Same Vend Rotor - Narrow Column 801,201,79x.x1 Same Nyliner, .750 801,819,52x.x1 Same Nyliner, .312 801,819,53x.x1 Same Bushing, .312 (Load Bar) 801,819,54x.x1 Same Push Arm 801,819,55x.x1 Same Front Gate Extension (Narrow)
  • Page 60 PARTS LIST P-SERIES CABINET AND VEND MECHANISM (SECTION 2) DN552P DN756P ITEM DESCRIPTION Nyliner, .750 801,819,52x.x1 Same Screw, 8-32 x 1 Phil Pan 800,303,86x.x1 Same Front Gate Extension, Wide 639,070,13x.x3 Same Vend Motor Assembly, Wide (Electronic) 639,071,80x.x3 Same Vend Oscillator - Wide Column 801,201,73x.x1 Same Package Retainer - Oscillator...
  • Page 61 PARTS LIST P-SERIES CABINET AND VEND MECHANISM (SECTION 2) DN552P DN756P ITEM PART DESCRIPTION 639,075,00x.x3 Assembly Rear Spacer Narrow Same 801,819,56x.x1 Bracket Rear Spacer, Narrow Same 639,070,27x.x3 Spacer Rear Narrow Same 801,819,59x.x1 Guide Channel Same 801,819,61x.x1 Latch, Rear Spacer Same 805,202,57x.x1 Assembly Guide Arm Same...

  • Page 62: Cabinet And Vend Mechanism (Section 3)

    PARTS LIST P-SERIES CABINET AND VEND MECHANISM (SECTION 3) DN552P DN756P ITEM DESCRIPTION Plate, Protective Left Side Extended Hinge (Specify Blue) 594,020,14x.x3 Same Plate, Protective Right Side Cabinet (Specify Blue) 165,000,04x.x3 Same Caterpillar Grommeting 801,809,93x.x1 Same Mullion 801,819,57x.x1 801,819,58x.x1 Mullion Cap 801,818,92x.x1 801,818,93x.x1 Screw, Phil Pan 8 –...

  • Page 63: Chute Assembly

    PARTS LIST P-SERIES CHUTE ASSEMBLY ITEM PART DESCRIPTION DN552P DN756P Chute Assembly 640,071,20x.x3 639,071,10x.x3 Chute 640,070,34x.x3 639,070,31x.x3 Liner, Chute 640,070,35x.x3 639,070,32x.x3 Plate Sensor 639,070,34x.x3 639,070,34x.x3 Support, Sensor 640,070,36x.x3 639,070,33x.x3 Bracket, Chute P-Series (prior to 7644) 000658 Housing Vend Sensor Board 639,070,41x.x3 Same Board, Vend Sensor P-Series...

  • Page 64: Evaporator Fan Assembly

    PARTS LIST P-SERIES EVAPORATOR FAN ASSEMBLY Page 64 of...
  • Page 65 PARTS LIST P-SERIES EVAPORATOR FAN ASSEMBLY DN552P DN756P ITEM DESCRIPTION Harness, Evaporator Fan 804,921,73x.x1 Same Evaporator Fan Motor Assembly 115 V/60Hz 640,040,30x.x3 Same Bracket, Evaporator Fan Motor 640,040,06x.x3 Same Bracket, Evaporator Fan Panel Left Hand 640,040,08x.x3 Same Bracket, Evaporator Fan Panel Right Hand 640,040,07x.x3 Same Sub assembly Evaporator Fan Shroud - 3...

  • Page 66: Power Distribution Box

    PARTS LIST P-SERIES POWER DISTRIBUTION Power Switch 804,101,12x.x1 Power outlet 110V 804,913,62x.x1 Power Dist Box Ass’y 639,030,40x.x3 Board with 3 Relays 804,921,06x.x1 Fuse 1.6 Amp 804,800,71x.x1 Part number and description subject to change with out notice. Page 66 of...

  • Page 67: Harnessing

    PARTS LIST P-SERIES HARNESSING HVV P-SERIES (SBC) DN552P DN756P ITEM PART DESCRIPTION Assembly Power Distribution Box 115/60 639,030,40x.x3 Same Motor Harness (Stack) 000594 000595 Board Power Harness (Includes Transformer) 804,922,14x.x1 804,922,14x.x1 MDB/Lock Power Harness (P8 & P5 to coin mech & lock) 804,919,19x.x1 Same Harness, AC Distribution...

  • Page 68: Refrigeration System

    PARTS LIST P-SERIES REFRIGERATION SYSTEM Page 68 of...
  • Page 69 PARTS LIST P-SERIES REFRIGERATION SYSTEM (SECTION ONE) DN552P DN756P ITEM DESCRIPTION Model 3000C-E Kit 115V/60Hz Same Model 3000C-E Refrigeration Unit 115V 640,040,50x.x3 Same Base Plate 639,040,02x.x3 Same Condenser, 1.33 FPI 802,600,69x.x1 Same Assembly, Heat Exchanger 640,040,00x.x3 Same Fan Blade, Condenser (FV900CW30S) 801,306,65x.x1 Same Assembly, Condenser Fan Motor 115/60...

  • Page 70: Miscellaneous Labels

    PARTS LIST P-SERIES MISC. LABELS ITEM DESCRIPTION DN552P DN756P Labels Price Label Sheet .50- 1.25 903,828,82x.x1 Same HVV Programming (English) 803,870,25x.x1 Same STS/Package Set-Up Label Domestic 803,871,36x.x1 803,871,78x.x1 Warning: Do Not Tilt 803,868,29x.x1 Same 134A Removable Substance 903,833,54x.x1 Same Money Removed Daily 903,805,70x.x1 Same Label, Warning Disconnect Main Power cord...

  • Page 71: Signs And Decals

    PARTS LIST P-SERIES DOMESTIC SIGNS & SIDE DECALS (Contact Parts Department for any not listed) ITEM DESCRIPTION DN552P DN756P Pepsi Side Decals Domestic 72x25x25 803,868,36x.x1 Same S/N Bottom HVV 805,034,71x.x1 805,304,69x.x1 S/N PC First’ 03 Top 805,032,63x.x1 805,032,65x.x1 Kit, Flavor Card Bottle Pepsi 803,874,93x.x4 Same Kit, Flavor Card Can Pepsi...

  • Page 72: Screws & Nuts

    PARTS LIST P-SERIES SCREWS & NUTS Page 72 of...
  • Page 73 PARTS LIST P-SERIES SCREWS & NUTS ITEM PART NUMBER PART NAME AND DESCRIPTION 900,301,70x.x1 Screw, Phil Pan Swage Form #6 - 32 x 3/8" 900,301,64x.x1 Screw, Phil Pan Swage Form w/washer #8 - 32 x 1/2" 900,301,83x.x1 Screw, Phil Pan Swage Form #10 - 32 x 5/16" 900,301,50x.x1 Screw, Phil Pan w/out washer, #8 - 18 x 1/2"...

  • Page 74: Washers, Bolts, & Misc. Hardware

    PARTS LIST P-SERIES WASHERS, BOLTS, & MISC. HARDWARE Page 74 of...
  • Page 75 PARTS LIST P-SERIES WASHERS, BOLTS, & MISC. HARDWARE ITEM PART NUMBER PART NAME AND DESCRIPTION 900,700,60x.x1 Washer, Delrin .047 Thick 3/8"IDx5/8"OD 901,303,77x.x1 Washer, Door Hinge 901,503,06x.x1 Washer, Flat #2949 (T-Handle) 901,503,08x.x1 Washer, Hex #29-34 (T-Handle) 900,700,36x.x1 Lockwasher, Split 3/8" 900,700,89x.x1 Lockwasher, Shakeproof 5/8"...
  • Page 76 PARTS LIST P-SERIES WASHERS, BOLTS, & MISC. HARDWARE ITEM PART NUMBER PART NAME AND DESCRIPTION 901,901,89x.x1 Clamp, Cable 1" Heyco 3390 900,901,79x.x1 Clamp, Nylon 5/16" Black Heyco 3355 or Dennison 10159 900,901,80x.x1 Clamp, Nylon 1/2" Heyco 3328 901,901,06x.x1 Hand Tie, x.x" 901,902,01x.x1 Wire Tie, 7 1/2"...

This manual is also suitable for:

Dn552pDn756p

Table of Contents

Save PDF