Portable Compressor Oil Chart For Hp1300 - Doosan XHP1000WCAT-T4i Operation And Maintenance Manual

Lubrication

Portable Compressor Oil Chart for HP1300

Refer to this chart for the required compressor oil. Note that the selection of oil is dependent
on the rated operating pressure of the compressor and the ambient temperature expected to
be encountered before the next oil change.
NOTE: Oils listed as "preferred" are required for extended warranty.
Compressor oil carryover (oil consumption) may be greater with the use of alternative
oils.
Rated Operating
Pressure Temperature
-10°F to 120°F
100 psi to 200 psi (
(6.9 to 13.8 bar)
Below -10°F
(Below -23°C)
Preferred Oils - Use of these oils with Doosan branded filters can extend airend warranty.
Refer to the Warranty Policy for details or contact your representative.
Preferred Oils 1 gal. (3.8 Liter)
Pro-Tec
Tier 4 Engine Oil
Ambient Compressor Oil
Specification
Preferred: PRO-TEC™
(-23°C to Alternate:
49°C) ISO Viscosity Grade 46
PAO, with rust and
oxidation inhibitors, for
rotary screw
compressor service.
(- Consult Factory
5 gal. (19.0 Liter)
36899698 36899706
46557017 46557016
Operation & Maintenance Manual
Table 2:
55 gal. (208 Liter)
36899714
46557015
275 gal. (1041 Liter)
36899722
89