Portable Compressor Oil Chart For Xhp1000 - Doosan XHP1000WCAT-T4i Operation And Maintenance Manual

Operation & Maintenance Manual

Portable Compressor Oil Chart for XHP1000

Refer to this chart for the required compressor oil. Note that the selection of oil is dependent
on the rated operating pressure of the compressor and the ambient temperature expected to
be encountered before the next oil change.
NOTE: Oils listed as "preferred" are required for extended warranty.
Compressor oil carryover (oil consumption) may be greater with the use of alternative
oils.
Design Operating
Pressure
350 psi to 500 psi
Preferred Oils - Use of these oils with Doosan branded filters can extend airend warranty.
Refer to the Warranty Policy for details or contact your representative.
Preferred Oils
XHP605
XHP1001
XHP405
88
Ambient
Specification
Temperature
-10°F to 125°F Preferred:
XHP 605
(-23°C to 52°C)
Alternate:
XHP405
ISO Viscosity Grade 68
Group 3 or 5 with rust and
oxidation inhibitors
65°F to 125°F designed for air
(18°C to 52°C) compressor service.
Preferred:
XHP605
XHP1001
Below -10°F Consult Factory
(Below -23°C)
1 gal. (3.8 Liter) 5 gal. (19.0 Liter)
- 22252076
- 35612738
- 22252126
Table 1:
55 gal. (208 Liter)
22252050
35300516
22252100
Lubrication
-
500 psi
275 gal. (1041 Liter)
22252068
-
22252118