Compressor Oil - Doosan XHP1000WCAT-T4i Operation And Maintenance Manual

Operation & Maintenance Manual

Compressor Oil

Refer to the Maintenance Schedule in this section for service intervals.
NOTE: If the compressor has been operating under adverse conditions,
or has suffered long shutdown periods, then more frequent service
intervals will be required.
Do NOT, under any circumstances, remove any drain plugs or the oil filler
plug from the compressor lubricating and cooling system without first
making sure that the compressor is shutdown and the system has been
completely relieved of all air pressure. Refer to Shutdown in the
Operating Instructions Section of this manual.
Completely drain the separator tank and the piping and oil cooler by removing the drain plug(s)
and collecting the used oil in a suitable container.
Replace the drain plug(s) ensuring that each is secure.
NOTE: If the oil is drained immediately after the compressor has been running, then
most of the sediment will be in suspension and will therefore drain more readily.
Some oil mixtures are incompatible and result in the formation of
varnishes, shellacs, or lacquers which may be insoluble. Refer to the
Portable Compressor Oil Chart in the Lubrication Section in this manual.
76
WARNING
!
CAUTION
!
Maintenance