Festo CPV-GE-DN3-8 Series Manual page 24

4.3 Setting configuration mode (2−element DIL switch)
Set the string configuration using the switch element 1 of
the 2−element DIL switch.
Configuration
mode
Normal mode
Tool change
configuration
4.4 Setting diagnostics mode (2−element DIL switch)
Set the output of the status bits using the switch element
2 of the 2−element DIL switch.
Diagnostics mode
Status byte addressed
via Strobed I/O"
Status byte addressed
via Discrete Inputs"
inputs
24
Position of the switch elements
Position of the switch elements
Festo CPV...−GE−DN3−8 0709NH English
DIL 1.1 = off
DIL 1.1 = on
DIL 1.2 = off
DIL 1.2 = on