Mechanical Assembly - Eliwell V800 Series Manual

MECHANICAL ASSEMBLY

The device is designed for mounting on DIN guides.
The admissible ambient temperature range for correct operation is between –10 and 55 °C.
Also avoid fitting the device in places where there is high humidity and/or dirt; it is suitable for use in environ-
ments with an ordinary or normal level of pollution. Keep the area around the instrument cooling slots adequately
ventilated.
Access to dip switches and connector for USB Copy Card / IWK/V
Remove the door (see figure below right) using a slotted screwdriver or the nail of your index finger.
Configure the dip switches and/or connect the USB Copy Card or connect IWK/V.
After having made the configurations, close the front panel of the keypad by pressing it with your fingers.
61.6mm 70.2mm
5.2mm
43.6mm
56.4mm
ID 985/V