Usb Copy Card Dipswitch Led; Supervision - Eliwell V800 Series Manual

USB Copy Card Dip Switch LED
LED
colour
A green
B green
C yellow
NOTE:
• after the parameters have been downloaded, the device uses the downloaded parameter map settings.

SUPERVISION

The protocol can be modified without using the IWK/V remote terminal by positioning DipSwitch 3, which is
housed inside the door, as described in the next page table:
LAN
The LAN function makes it possible to link up to 4 ID985/V devices connected to V800 in a network (see ID985/V
manual, code 9MAX0017). The maximum distance between one device and the other must not exceed 7 metres,
while the maximum distance between the first and the last device in the network must be approximately 50m.
Televis/Modbus
The connection to TelevisSystem / Modbus RTU can take place:
• via TTL serial port. It is necessary to use the TTL/RS485 converter BusAdapter 130 or 150
• models /P1 /P3 only directly via RS485 serial port.
UPLOAD
in progress completed correctly
blinking ON
/ /
/ /
failed in progress
ON /
/ blinking
blinking /
19 - EN
DOWNLOAD
completed correctly failed
/ /
ON ON
/ blinking
V800