Usb Copy Card - Eliwell V800 Series Manual

USB COPY CARD

The USB Copy Card is an accessory connected to the DMI/CC serial port and is used for quick programming of the
device parameters (upload and download a parameter map to one or more devices of the same type). The opera-
tions are performed as follows:
• insert USB Copy Card in the suitable connector with device ON
• set DipSwitch 1 and 2, which are housed inside the door, as described in the following table
• wjen completed remove the USB Copy Card
• set DipSwitch to OFF position
Dip Switch USB Copy Card
Upload / Download parameters from USB Copy Card
Function
Upload
Download
V800
Dip1 2
ON OFF
OFF ON
UPLOAD: device --> USB Copy Card This operation
uploads the programming parameters to the USB
Copy Card.
NOTE: USB Copy Card will be formatted before use
DOWNLOAD: USB Copy Card --> device This opera-
tion downloads the programming parameters to the
device.
18 - EN